Construction sites in states such as Florida, where there is frequent rain, and the climate remains humid, require specialized management and control of groundwater conditions surrounding the areas on and near the main site. The many rivers, canals, and lakes that call Florida home are also major considerations for construction projects as they often contribute to leftover standing water and flooded low-lying areas.
Building in these areas requires particular systems to manage the moisture content of the underlying land. This control is critical to maintaining a safe work environment for workers and visitors onsite, as well as for machinery operators. For contractors, it’s very difficult for project milestones to be completed or even started until strict requirements for safety and factors critical to structure building are met. Specialized pumps used for dewatering land parcels are essential to this adherence to local regulations and worker safety and one of the most important of these systems are wellpoint pumps in Jacksonville, FL.
Let’s take a closer look at exactly why wellpoint pumps in Jacksonville, FL are so important, what they are and how they work.
What Are Wellpoint Pumps?
These pump systems allow the removal of groundwater from surfaces like gravel and sand, allowing excavation to safely proceed in more stable and dry dirt. They also work to a lesser extent in clay or rock. Once the water is removed from the site, workers can then begin to safely lay the underlying structural foundation for the project.
The suitability of wellpoint pumps in Jacksonville, FL depends on reliable data collection relating to the intended usage site. Variables that must be collected include depth, size, and current water distribution on site. Also, the ground support method, proximity to existing structures, soil makeup, and design of the proposed structure are all important pieces of the puzzle. Though no two sites are exactly the same, wellpoint pumps in Jacksonville, FL are known to be adaptable and efficient for dewatering in most situations.
Total Dynamic Head
Another critical variable that contractors will measure is the Total Dynamic Head (TDH), or the total height water is expected to be upwardly pumped while accounting for internal pipe friction. Ironically, many shallow applications can be more complex than deeper excavations depending on the soil's makeup and current condition so it’s important to always be thorough with your site assessment regardless of the site you are working on.
Wellpoint System Description
To better visualize how wellpoint pumps in Jacksonville, FL works, you can imagine a series of tubes with small diameter measurements inserted into the dirt. These tubes can run in parallel or surround the area to be excavated. Depending on the site's conditions, these tubes may require holes to be pre-drilled in advance. Once inserted, the tubes then connect to header piping on the surface which in turn connects to the main dewatering pump(s).
After this connection is sealed, vacuum pressure brings the under-soil water to the surface and is safely directed to the agreed upon discharge collection, be it a man-made pit or perhaps directly pumped into a truck for removal. Once installed and configured, wellpoint pumps in Jacksonville, FL remain active for the project's duration to ensure safety standards are maintained.
Getting To Grips With Wellpoint Pumps In Jacksonville, FL
If you are a contractor or you work on construction sites, it’s essential that you have a good understanding of how wellpoint pumps in Jacksonville, FL, can be used to safely drain medium to large construction sites of underlying water to ensure the safety of your site, workers and project as a whole. To find out more about wellpoint pumps in Jacksonville, FL get in touch with our team at Florida Pumping Solutionstoday. With our experience and expertise, you can ensure that your site is set up for success from the outset.